CYLINDER HEAD

Using the sequence shown, tighten bolts in the following steps:

Torque bolts to 90 Nm (66 ft. lbs.) (All Capscrews)

Recheck to 90 Nm (66 ft. lbs.) (All Capscrews)

Torque bolts to 120 Nm (90 ft. lbs.) (Long Capscrews Only)

Re-check all bolts to 120 Nm (120 ft. lbs.) (Long Capscrews Only)

Tighten all bolts an additional 1/4 turn (90 °) (All Capscrews)