HAMILTON P7100 PUMP SPRINGS

When doing a performance pump cam in your P-7100, you will need to use these pump springs to aid in keeping the roller in contact with the cam at high rpm. I also suggest increasing fuel pressure in accordance with what your pump builder dictates. These springs are made in the USA out of the best wire available, triple shot peened for low load loss, and have a low mass and high natural frequency.

Buyer accepts all liability for their use. P-pumps in performance applications can occasionally stick the rack, which allows the pump to keep fueling until there is a loss of, air via an air-shutoff, or until the mechanical limits of the motor are reached. If the latter is the case, expect to have help picking up pistons off of the track.

$199.00